Expert Answers about GMC Sierra 2500

• Recommended 5th Wheel Trailer Hitch For A 2020 GMC Sierra 2500 Denali With 6-3/4' Bed
• Hi Kim, For a 2020 GMC Sierra 2500 I have two options depending on whether you'd prefer above or below bed rails: For above bed rails you'll want the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550034 and Demco Premier Series Above-Bed Base Rails # DM39FR. For below bed rails you'll want the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550022 and Underbed Rail and Installation Kit # DR37FR. Both hitches have an 18,000lb capacity and can automatically slide back...
  view full answer...


• Weight of the Head and Base for the PullRite OEX Super 5th Wheel Hitch
• David, the hitch head # PUL39ZR for the PullRite OEX Super 5th-Wheel Hitch for Chevy/GM Prep Package # PUL36ZR weighs 84 lbs, and the base # PUL59ZR weighs 81 lbs.
  view full answer...


• Will Brophy Camper Tie-Downs # HSSF Fit A 2018 GMC Sierra 2500HD
• Hey David, The Brophy Slide In Camper Tie-Downs # HSSF could potentially work but you'll first want to ensure you have enough clearance for them to fit up against the inner lip of the bedrails and clear the side body of the bedrails. I've attached a diagram below of their dimensions so you can measure your bedrails and confirm fitment. To complete the setup Brophy also offers turnbuckles with part # TDHP.
  view full answer...


• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
• Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...


• Replacement MORryde Equalizers For A 2024 Forest River RV Sabre 38DBL
• Hi John, When replacing your equalizers it's best to match the bolt hole spacings to prevent having to switch out/alter your other suspension components to fit the new spacing. You'll need to measure the horizontal distance between the shackle strap bolt holes and the vertical distance from the hanger bolt hole down to the center of the shackle strap bolt holes. Let me know what measurements you have on the current equalizers and I'd be happy to look for the correct fit.
  view full answer...